one of the things that have become of great importance today is the speed of our mobile and desktop devices, and this applies to almost all of our equipment from mobile phones, laptops, and desktop computers.
there are many things that you can do to increase the speed of your laptop, one of the best and easiest things you can do to increase the speed of your laptop is to install an SSD for your laptop, so how?
Solid State Storage (SSD), why would you need one on your mobile device?
There is no doubt that the speed of the storage unit is one of the very important factors (and here I mean very) in affecting the speed of games as well as dealing with design and rendering programs because they can handle and transfer large volumes of data at the same time.
To help you understand this point, I must tell you that the speed of waiting and loading screens in games depends on the speed of your hard disk.
These modules are divided into modules based on the SATA interface, which are a thing of the past, due to their lower speed. The reason here is that the solid-state storage units (SSD) that work through SATA III ports, for example, do not work at full speed, as the SATA port greatly scales them, which necessitated work on or transferring the search for another standard that is faster than the old standard To get the full power that NAND memories in solid-state storage units can provide.
Solid State Storage with NVME Standard
This is where PCI Express solid-state drives come in different form factors To illustrate the difference, there are two types of SSDs:
1. The first type is the oldest and is called SATA SSD, which is the least fast (500MB/s) and works with the SATA interface, and it comes with an M.2 form factor (and its shape is rectangular) and also a 2.5-inch form factor (its shape is similar to an HDD).
2. The second type is PCI-powered modules, and supports the so-called NVME standard (which allows them to work on PCI Express ports) instead of traditional SATA ports, benefiting from four PCI threads, instead of just two, and thus much faster data transfer speeds, It can go up to 7000MB for reading and write speeds - and even more - with some expensive units from the last generation.
So, to remove the confusion that may occur due to these many names, you can look at the differences as follows: There are two types of storage units, the faster SSD and the slower HDD.
In general, SSD storage will give you tremendous speed compared to traditional HDDs as it will be around 70x or more depending on the speed of SSD storage you intend to get.
Of course, I recommend Nvme modules because they offer ten times more than SATA modules and are currently available at affordable prices for the vast majority of users.
These speeds will benefit you in providing faster gaming, standby screens, design software, downloading files, transferring files to your device, even the boot process, and much more that you will feel in connection with your device. The softness you will feel on yourself.
Does your laptop supports the installation of a hard SSD?
All you have to do is search and find your original storage size, in which case we'll assume it's a hard drive. And to save you some research, laptops usually come with 2.5-inch storage units, which is the standard size for such units.
Due to their 2.5-inch compatibility, these units can be easily replaced with SATA SSDs, but you should also pay attention to the thickness of the hard drive to purchase an SSD unit that is fully compatible and requires no additional installation.
It is also worth noting here that even if the SSD you have - if you have one before - comes in a smaller size, for example, there are special brackets sold on the Internet.
How is the installation process?
The installation process itself is not very difficult, all you have to do is to choose the appropriate module by following the steps we mentioned above and then start the installation process for the new module.
But before starting the same process, we recommend that you move your data from the original hard drive to external storage to recover your important files and data from loss or move them for easy recovery later. The best thing to do in this case is to download a program that will clone or clone the original hard drive and move its data to external storage.
Now the next step is to completely disconnect the laptop, which includes turning off the device and unplugging the power outlet. Next, remove your device's battery if possible, and then hold the power or power button for five seconds to discharge any remaining electrical charge on the device.
Then remove the back of the laptop to reveal the internal parts. To do this best, check the user manual that came with your laptop, or even by downloading a copy from the Internet if you do not have the original. However, after opening the back cover, touch any uncoated area with your hand to protect your computer from static electricity in your body.
Next, find the old unit by reading the user manual again, unscrew the old HDD, and remove the bases, screws, screws, etc. Remove all parts associated with it, like these are the parts you will likely need later. To install on your type of SSD. If the volume is thinner than the original hard drive, you likely need a piece of metal called a thicker spacer to properly hold the SSD storage inside the laptop.
Finally, after installing the new SSD storage, make sure that it is fully installed, takes up adequate space, and is properly seated in its slot. Then put the laptop back cover on and make sure everything is back to normal and turn on your mobile device to enjoy the new SSD speed.
Anyway, now install this cover in the same place on the case and then attach the same case to the body of the laptop and tighten the screws and reattach the back cover of the laptop.
How to install Extra Fixed?
Now, as I just mentioned, there is another way to add and set up the extra storage space. By inserting the caddy drive into your mobile device instead of the floppy drive. For those who don't know, this enclosure or cage is a piece of plastic that simply inserts a hard drive or SSD storage and then installs it into the space for your floppy drive or DVD room.
So, as you did in the previous case, you will remove the back cover of the laptop, but this time you will unscrew the DVDRW floppy drive and you can find out their screws from the user manual or via. Here are some of the marks you will find on the screws that will be shaped like a DVD. To make things even simpler, these screws will be located in the middle of the laptop, opposite where the DVD is on top.
Follow your DVDRW from the inside until you reach the end inside the laptop, then you will find the screws marked on the DVD, unscrew the screws and under it you will find a small metal clip, push it with any metal object to get the DVD. It comes out from the side of the device.
After removing the DVDRW from the device, unscrew the metal clip from where it is installed in the DVD body, and then insert it into the drive of the case in the same place (the same design as DVDRW, so you must install it in the same way, so this small clip is very important because the case will be installed inside the laptop The same is true here for the front plastic part of the DVDRW.
You can easily remove the DVD slot by pressing a pin into the small hole you found in the sleeve and then you will see that the sleeve is this plastic attached to the body of the DVD with a few simple clips.Put it on and separate the plastic cover About the body of the DVD because we will have to insert it into the box so that it does not leave its place empty.
Anyway, now install this cover in the same place on the case and then attach the same case to the body of the laptop and tighten the screws and reattach the back cover of the laptop.
solution
And now, dear reader, you have two storage units in your mobile device to enjoy the amazing speed of the SSD unit that gives you the ample space of traditional hard drives HDD on the same mobile device you own.
It is an old model. Remember to follow the steps very carefully and you can also watch some videos that show this process step by step. Make sure you choose the right size that will fit smoothly and fit the size of your machine, as well as have all the attachments you might need to adjust thickness and other things to help with installation. The sound is in place.
Also, don't forget to transfer the data before you start working, so if you're replacing your hard drive with a solid state drive, you'll avoid the hassle of transferring it later. But if you're going to use both, you can keep the data as is inside your hard drive and enjoy an SSD as a quick extra! So, we talked about installing a solid SSD in a laptop by replacing the old or adding a hard drive.